PART I – Teaching method disassembly and laptops

Chapter One
Disassembly and laptop
In this section we will talk about the principles of disassembly and laptop. It is noted that there are many images in this section specifically ensure that we deliver the information.
We will see the first commentary on the device model of the most famous organs in the Arab markets.

Dell inspiron 1525
We must learn all the basics of disassembly and any device Laptop and we’ll explain photographer Avi HD
From the basics of decoding any device Laptop battery must be removed and the separation of the power source by
It is intended power source (your charger to the device)
Then we can start racing in decoding screws on the bottom of the device as shown to you
We then unzip the HDD through its own decoder nails as shown in the picture
We then directed from the machine in this way
We then unzip the DNA of the device in this way de
Then we withdraw Blackcurrant also shown to you
Then we Loosen the screw that secures the AirPort card and then we remove its cable carefully
Then we lift the kart and get back to decode the rest of the screws on the bottom of the device as shown to you
Take into account the attention of forms and sizes of nails because each form has a place proves it is not permissible to install interchangeable
Then we disconnect all cable as shown
Then start lifting parts at the top of the machine
When you take into account the lack of tools to raise these plastic parts
Put a piece of paper to the lack of any scratches when you use a screwdriver to lift these parts
After the lifting of this part we deal gently with him because there Fallatah hyphen between him and Madhirbord device
We are now Loosen the screws installed by the keyboard in this way
Then start lifting this way
And take into account the special lift Fellata Balkibord this way
And then show us the Fellata we carefully lifted
Then we begin to unpack nails special Bamufslat illustrated image
We are now raising the Cable Allowaarles which we Pfkha from the bottom of the device
After raising them we Fellata special lifting device screen in this form
Then after that we can separate the device’s screen in this way must be placed in a safe place until they need them
Now we begin unzip this special cable Bacart Bluetooth
Then we lift the kart itself Loosen the screw that secures him
In this way
Then we move this part down to remove Fellata own Ballid (Shining)
Then move your other part Bafilath responsible for mouse
After we move them Loosen the screws set in the picture
And do not forget the separation of these parts at the bottom of the machine
To be able to raise the upper part of the device
Then we can raise the upper part of the device in this way
If we want to maintain or switch Altach Bad we lifting this way
First we raise the Fellata hyphen between Altach Bad your mouse and Alklalk
We then unzip the installer nails this part
Then we can separate the private part of the private part Balcliq Baltach Bad
There we lifted the lid shown in the picture, which is located in the front part of the device and if we want to bring out the Almadhirbord of the device, it is better to separate this part
This is a clearer picture of this part we are talking about
Then we start to raise your cable Balsmaat this way
We must deal with these cable lightly because it is too weak

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.