- Joined
- Nov 2, 2017
- Messages
- 8,643
- Likes
- 1,127
- Points
- 4,577
- Age
- 39
- Location
- Tbilisi
- Website
- alexlaptoprepair.com
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
Asus N552VX Repair Guide + boardview | Schematic , Boardview | 0 |
| Similar threads |
|---|
| Asus N552VX Repair Guide + boardview |
Laptop repair Latest videos
Latest threads
LPCAMM2 list of the important voltages and signals to check LPDDR5 CAMM2 faults for modern laptops.
LPCAMM2 SAY Goodbye to the Laptop RAM circuit
and here the list of the important voltages and signals to check LPDDR5 CAMM2 faults for modern laptops.
In recent days, Lenovo has released the world's first laptop featuring LPDDR5 CAMM2 memory, a module developed by SAMSUNG. This new module is an improvement over DELL's CAMM and is expected to become widespread in the coming years for several reasons. One of the primary benefits is that it addresses the recurring failures seen in embedded RAM chips on laptop motherboards and the issues with Apple’s Unified Memory in their devices over the past few years. They had to solder RAM chips alongside processors to achieve the required speed, but this led to numerous failures. With limited spare parts, many laptops became died and unusable, and several models gained a poor reputation.
The new module offers multiple times the data transfer speed while consuming 60% less power compared to previous technologies. This means more efficient and faster performance, fewer battery charges, longer lifespan, and lower temperatures. The design also allows users to replace the module themselves, with the connector being easily replaceable, eliminating the issues associated with built-in RAM failures. Currently, the module is available in capacities ranging from 16GB to 128GB.
For specialists
The module has 644 pins, and the PCB consists of 10 to 16 layers, making its size approximately 8cm × 3cm. Another significant advantage is that there is no longer a RAM circuit on the laptop motherboard in models that support this module. The module takes 5V from the power system and converts it to several voltages, which I will list at the end of this post, along with important signals that will help us troubleshoot issues in future generations using schematics . This means repair will be easier. For example, the recently released model uses the PMIC5200 chip, which provides all the necessary voltages, whether PWM or LDO, for the module and the processor. The old SPD system couldn't be used because the module functions as more than just RAM in a single piece, so they relied on the SPD5118, an SPD HUB IC.
The recently released laptop model is the ThinkPad P1 Gen 7.
Fortunately, in recent days, the initial design for ALEXSOF LPCAMM2 ANALYZER TESTER . This tester will be installed in the module's connector to measure important signals and pins, and display POST CODES, which will aid us in troubleshooting faults. I plan to start testing as soon as the module becomes widely available in the market. Below is a list of the main voltages and some signal names related to the module that will be tracked without a tester using the laptop’s schematic.
- 1.1V, 0.5V, 1.05V
- VDD2L=0.9V
- VDD2H=1.05V
- VDDQ=0.5V
- VDD=1.1V
- HSCL=1.0V
- HSDA=1.0V
- HSA=2.1V
- VPP=1.8V
- DVFSQ#=1.8V
- PWR_EN=1.8V
- UNLOCK=1.8V
- DQS=VDDQ
- DQ0=VDDQ
- DMI=VDDQ
- WCKT,C=VDDQ
- RESET#=80-20% of VDDQ
- CLK_T=VDD
- CLK_C=VDD
- CLK-N=F-EDGE
- CLK-P=R-EDGE
- VIN_BULK=5V
- REG= 46, 4A, 4C
- TSD=1024 byte
and here the list of the important voltages and signals to check LPDDR5 CAMM2 faults for modern laptops.
In recent days, Lenovo has released the world's first laptop featuring LPDDR5 CAMM2 memory, a module developed by SAMSUNG. This new module is an improvement over DELL's CAMM and is expected to become widespread in the coming years for several reasons. One of the primary benefits is that it addresses the recurring failures seen in embedded RAM chips on laptop motherboards and the issues with Apple’s Unified Memory in their devices over the past few years. They had to solder RAM chips alongside processors to achieve the required speed, but this led to numerous failures. With limited spare parts, many laptops became died and unusable, and several models gained a poor reputation.
The new module offers multiple times the data transfer speed while consuming 60% less power compared to previous technologies. This means more efficient and faster performance, fewer battery charges, longer lifespan, and lower temperatures. The design also allows users to replace the module themselves, with the connector being easily replaceable, eliminating the issues associated with built-in RAM failures. Currently, the module is available in capacities ranging from 16GB to 128GB.
For specialists
The module has 644 pins, and the PCB consists of 10 to 16 layers, making its size approximately 8cm × 3cm. Another significant advantage is that there is no longer a RAM circuit on the laptop motherboard in models that support this module. The module takes 5V from the power system and converts it to several voltages, which I will list at the end of this post, along with important signals that will help us troubleshoot issues in future generations using schematics . This means repair will be easier. For example, the recently released model uses the PMIC5200 chip, which provides all the necessary voltages, whether PWM or LDO, for the module and the processor. The old SPD system couldn't be used because the module functions as more than just RAM in a single piece, so they relied on the SPD5118, an SPD HUB IC.
The recently released laptop model is the ThinkPad P1 Gen 7.
Fortunately, in recent days, the initial design for ALEXSOF LPCAMM2 ANALYZER TESTER . This tester will be installed in the module's connector to measure important signals and pins, and display POST CODES, which will aid us in troubleshooting faults. I plan to start testing as soon as the module becomes widely available in the market. Below is a list of the main voltages and some signal names related to the module that will be tracked without a tester using the laptop’s schematic.
- 1.1V, 0.5V, 1.05V
- VDD2L=0.9V
- VDD2H=1.05V
- VDDQ=0.5V
- VDD=1.1V
- HSCL=1.0V
- HSDA=1.0V
- HSA=2.1V
- VPP=1.8V
- DVFSQ#=1.8V
- PWR_EN=1.8V
- UNLOCK=1.8V
- DQS=VDDQ
- DQ0=VDDQ
- DMI=VDDQ
- WCKT,C=VDDQ
- RESET#=80-20% of VDDQ
- CLK_T=VDD
- CLK_C=VDD
- CLK-N=F-EDGE
- CLK-P=R-EDGE
- VIN_BULK=5V
- REG= 46, 4A, 4C
- TSD=1024 byte
msi gf75 burnt smell on power up
Hi,
I do small repairs to my msi gf75, but recently one of the hinges was very hard to move and broke the surrounding plastic of the laptop covers.
Today I tried to glue that part and when I powered up the laptop I smelled something has burnt. Then the laptop stopped booting up at all.
What could be burnt ?
I do small repairs to my msi gf75, but recently one of the hinges was very hard to move and broke the surrounding plastic of the laptop covers.
Today I tried to glue that part and when I powered up the laptop I smelled something has burnt. Then the laptop stopped booting up at all.
What could be burnt ?
motherboard M4HM87P Rev 1.0 unknown ic
Hello,
I need help with a motherboard.
It is a mini PC, GIGABYTE GB-BXi7-4770R.
The motherboard M4HM87P Rev. 1.0
As you can see in the photo, the IC burned out.
I need the label/letters/numbers of the ic or the circuit diagram/schematic.
I am thankful for every help.
Best regards
I need help with a motherboard.
It is a mini PC, GIGABYTE GB-BXi7-4770R.
The motherboard M4HM87P Rev. 1.0
As you can see in the photo, the IC burned out.
I need the label/letters/numbers of the ic or the circuit diagram/schematic.
I am thankful for every help.
Best regards
HOW TO UPGRADE DPOX180H-FNIRSI FIRMWARE TO FIX ALL ISSUES
HOW TO UPGRADE DPOX180H-FNIRSI FIRMWARE TO FIX ALL ISSUES
Digital Phosphor Dual Channel Handheld 180 MHz Oscilloscope
修复问题：
1：能够看到方波上升下降的垂直线
2：修改了垂直电压光标测量的名称
3：修复开机语言
--------------------------------------------------------------------------------
Fix issues:
1: When measuring a square wave, you can see the rising and falling vertical lines.
2: Modify the name of the vertical voltage cursor measurement
3: Modified the text of the switching language interface.
--------------------------------------------------------------------------------
修复3点：
4：信号发生器频率问题
5：个别固件升级变砖问题
6：暂停后只显示单帧波形，便于分析协议
----------------------------------------------------------------------------------
Fix the problem:
4: Signal generator frequency problem
5: Some devices cannot be turned on after firmware upgrade
6: After pausing, only a single frame waveform is displayed, which is convenient for analyzing the protocol
-----------------------------------------------------------------------------------
2023/09/27 V40 LATEST VERSION
------------------------------------------------------------------------------------
修复内容：
7：波形更细，更清晰，降低了波形粗细
8：方波垂直线更亮，更明显
-------------------------------------------------------------------------------------
Fixes:
7: The thickness of the waveform is reduced, making the waveform thinner and clearer.
8: The vertical lines of the square wave are brighter and more obvious
--------------------------------------------------------------------------------------
Upgrade steps:
WATCH THIS VIDEO
Digital Phosphor Dual Channel Handheld 180 MHz Oscilloscope
修复问题：
1：能够看到方波上升下降的垂直线
2：修改了垂直电压光标测量的名称
3：修复开机语言
--------------------------------------------------------------------------------
Fix issues:
1: When measuring a square wave, you can see the rising and falling vertical lines.
2: Modify the name of the vertical voltage cursor measurement
3: Modified the text of the switching language interface.
--------------------------------------------------------------------------------
修复3点：
4：信号发生器频率问题
5：个别固件升级变砖问题
6：暂停后只显示单帧波形，便于分析协议
----------------------------------------------------------------------------------
Fix the problem:
4: Signal generator frequency problem
5: Some devices cannot be turned on after firmware upgrade
6: After pausing, only a single frame waveform is displayed, which is convenient for analyzing the protocol
-----------------------------------------------------------------------------------
2023/09/27 V40 LATEST VERSION
------------------------------------------------------------------------------------
修复内容：
7：波形更细，更清晰，降低了波形粗细
8：方波垂直线更亮，更明显
-------------------------------------------------------------------------------------
Fixes:
7: The thickness of the waveform is reduced, making the waveform thinner and clearer.
8: The vertical lines of the square wave are brighter and more obvious
--------------------------------------------------------------------------------------
Upgrade steps:
WATCH THIS VIDEO
DPOX180H FIRMWARE DUMP FILE OK V4.0 W25Q128
DPOX180H FIRMWARE
DUMP FILE OK V4.0
W25Q128 CHIP (16MB FILE)
DUMP FILE OK V4.0
W25Q128 CHIP (16MB FILE)