Joined
Dec 2, 2024
Messages
9
Likes
1
Points
3
Age
19
#4
my board is fx516pc r5.0 this bios
The file you left does not turn on the machine.
My failure started like this, my laptop was updating and it suddenly turned off and the bios was damaged and I can't find it anywhere.
 
Joined
Dec 2, 2024
Messages
9
Likes
1
Points
3
Age
19
#7
I am programming it with a ch341a with asprogrammer but I don't get the ic "25r128jvsq" and I am programming it under the 25q128bv, no problem.? Could it be that the bios of the graphics card is damaged and that is why the image is not displayed?
 
Joined
Dec 2, 2024
Messages
9
Likes
1
Points
3
Age
19
#9
HELLO HOW ARE YOU?
HERE I ATTACH THE FILE. THE EQUIPMENT WAS WORKING WELL, THE WINDOWS UPDATES WERE UPDATED AMONG THEM WAS THE BIOS FIRMWARE AND THE MACHINE WAS SHUT DOWN. AFTER THERE IT TURNS ON AND DOES NOT GIVE AN IMAGE. AND THAT THE CAPS LOCK LIGHT REMAINS STEADY, IT DOES NOT TURN OFF OR ON. THERE ARE THE IMAGES. I TRIED WITH A BIOS OF THE SAME BUT ANOTHER VERSION IT POWERS ON BUT ONLY LIGHTS BACKLIGHT AND THE CAPS LOCK WORKS AND SWITCHES OFF AND EVERYTHING. BUT IT DOES NOT SHOW AN IMAGE, I DO NOT GET EITHER A PLAN OR BOARDVIEW OF THIS VERSION 5.0
 

Attachments

Joined
Dec 2, 2024
Messages
9
Likes
1
Points
3
Age
19
#14
THE BIOS THAT YOU SENT ME DID WORK BUT THE BIOS WON'T START FOR ME. BOOT DIRECTLY INTO WINDOWS. I PRESS F2 WITHOUT ACCESS. AND IT ONLY RECOGNIZES THE INTEL IRIS XE GRAPHICS CARD AND NOT THE NVIDIA. WHAT SOLUTION CAN YOU GIVE ME?
 

Admin

Staff member
Laptop Repair Team
Joined
Nov 2, 2017
Messages
8,892
Likes
1,135
Points
4,577
Age
40
Location
Tbilisi
Website
alexlaptoprepair.com
#17
THE BIOS THAT YOU SENT ME DID WORK BUT THE BIOS WON'T START FOR ME. BOOT DIRECTLY INTO WINDOWS. I PRESS F2 WITHOUT ACCESS. AND IT ONLY RECOGNIZES THE INTEL IRIS XE GRAPHICS CARD AND NOT THE NVIDIA. WHAT SOLUTION CAN YOU GIVE ME?
thats bcuz fast boot enable , keep pressing F2 ONCE YOU PRESS POWER BUTTON
check the configration of the gpu in the bios , and once the file work you can easily update your bios from the windows just download the file from the website with the part number and update your bios for latest version .
 

Laptop repair Latest videos

Latest threads

MPS PROGRAMMER DUAL MODE ONLINE AND OFFILINE

PMBUS MPS PROGRAMMER
Features:
Support Online/Offline mode
( connect to motherboard directly , or in some cases we need to solder the ic on the offiline adapter )
All Requirements Support
3V,1.8V,SCL,SDA
EN/PE,IREF,IREF2,PGOOD,SALRT
ESD Protections , Indicators
Read & Write program
Monitor functions online and offline
Change parameters
Support backup one chip or all systems ( multi chip together )
PMBUS PROGRAMMER CHIP SUPPORT LIST:

MP2940, MP2940A, MP2940C, MP2942, MP2943
MP2944, MP2945,MP2948C MP2949A, MP2950
MP2959, MP2962, MP2969, MP2979A,MP2955
MP2956,MP2958, MP2951, MP2853, MP2888
MP2886,MP2884, MP2965,MP2966,MP2968
MP5023,MP2975,MP2978,MP2972, MP2855
MP2949A, MP5920, MP5922, MP2926, MP2988
MP2971,MP2973, MP2845,MP2845A, MP2856
MP2857, MP2880, MP2882,MP2872,MP2874
MP2878,MP2960, MP2964, MP9941, MP2985
MP2992,MP2993, MP2986,MP2983,MP2975,MP2972
MP2976,MP2978,MP2995,MP5990,MPQ2977
MPQ2967,MPQ2861MP2862,MPQ8646,MP2860
MP2891,MP2890,MP2891A



MPS Import & Export & Modify Program :

1739567804966.jpeg






















































Connect the mps chip online using SCL,SDA,GND to the motherboard laptop , pc , gpu card
or solder your mps chip on the offline adapter and connect it to the programmer
Open the MPS software ( download link with the progammer ) , when it is not connected to the programmer, the following red message will showing [USB is not connected!
When the programmer is connected, the [USB is not connected!] will disappear
The programmer is connected to the chip through 3-pin plugs: black line: GND, SDA, SCL If you do not know which specific point, please check the datasheet of the chip or the schematic
Power on the target board, and then point to the SCAN search chip (Note: for online mode the chip must be energized to be recognized!)
Recognize the chip MP2886A, PMBUS address is 20H, Vendor lD is 25H.
If there is more than one chip, it will be displayed in the left list, click the title of the chip to select it
Click [Input], the window shows the basic parameters of the chip, the number of phases ,vboot,PWM-VID, FERQ,RC BOOT,,etc and you can modify them
Click [Reglster], in this interface backup program and write new program or mdify
Backup program: Click [Cur.Export] for the chip you choose
[Sys. Export] this option backup all chip read by the programmer , enter the name of the file to be saved and save it.
[Cur. Epot] is recommended so you can backup each chip seprated
Write Program: (The [Sys. Config] is directly written to the chip, The [Sys. cmd] needs to be written manually by us to facilitate the change of parameters after writing)
Method 1: Click [Sys. cmd], select the program file, open it, import the configuration, click [WRITE TO NVM], and write the program to the chip
Method 2: Click [Sys. Config], select the program file, open it, and then the program will be automatically written to the chip, then the program will be automatically written to the chip.

link of the mps programmer

HP EliteBook Folio G1 6050A2776001-MB-A01 BIOS CLEAR ME + EC

HP EliteBook Folio G1
6050A2776001-MB-A01
BIOS CLEAR ME + EC

Dell Inspiron 15 3520 2024 model CMOS location

Does this board have a different option opposed to a CMOS battery.is it a chip. I hadn't pulled the board from the machine but something tells me I won't find a battery on the top side. Google didn't. Show a location that I saw. Needing some help with this notion HDD. Just a m.2

MSI Raider GE76 MS-17K41 BIOS clear ME + EC ENE-KB9548QF2

MSI Raider GE76
MOTHERBOARD: MS-17K41
BIOS clear ME+ EC ENE-KB9548QF2 FILE

MSI Raider GE76 MS-17K41 BIOS DUMP + EC KB9548

MSI Raider GE76
MS-17K41
BIOS DUMP + EC KB9548

MSI GE76 RAIDER 11UG MS-17K3 MS-17K31 Ver 1.1 BIOS DUMP

MSI GE76 RAIDER 11UG
MS-17K3
MS-17K31 Ver 1.1
BIOS DUMP

MSI GP76 MS-17K41 BIOS DUMP REV2.13070 GN20-E6-A1

MSI GP76 MS-17K41
3070 GN20-E6-A1
BIOS DUMP REV2.1

HP prodesk 400 G7 microtower JAMIE REV B BIOS DUMP

HP prodesk 400 G7 microtower
JAMIE REV B
BIOS DUMP

HP ProDesk 400 G7 Small TYRION/TOMMEN REV B BIOS DUMP

HP ProDesk 400 G7 Small
MB:TYRION/TOMMEN REV B
BIOS DUMP

HP probook 650 G3 CLOONEY -6050A2860101-MB-A01 BIOS CLEAR ME

HP probook 650 G3
CLOONEY -6050A2860101-MB-A01
BIOS CLEAR ME

Motherboard repair.

Hello engineers in the house, dell Inspiron Star lord 13 R 25296 not switching on, but blinking 2 amber lights and 7 whites on AC charger,but blinking 1 amber light and 3 white lights, No display. What can be the problem and how to solve it?

IdeaPad 5 15IAL7 NM-E401 REV 1.0 BOARDVIEW

IdeaPad 5 15IAL7
LCFC JS574 NM-E401 REV 1.0
NS-E401 Rev10
BOARDVIEW

IdeaPad 5 15IAL7 LCFC JS574 NM-E401 REV 1.0 BIOS DUMP + EC

IdeaPad 5 15IAL7
LCFC JS574 NM-E401 REV 1.0
BIOS DUMP + EC

ASUS FX516PC CLEAR ME BIOS FILE+EC

ASUS FX516PC
CLEAR ME BIOS FILE

Intel CSME 12.0 Firmware Repository Pack r1

Intel CSME 12.0 Firmware Repository Pack r1

12.0.0.1046_CON_H_B_PRD_EXTR
12.0.0.1059_CON_H_B_PRD_EXTR
12.0.0.1062_CON_H_B_PRD_RGN
12.0.0.1069_CON_H_B_PRD_FWU
Top