Dear friends, sharing a shortcut but working solution for P2808 fet.
This fet is frequently used on clevo laptops and is invariably burnt..
Here is the solution.
01. Connect PIN2(VIN) to PIN8(VIN1) with a jumper wire with 20 Ohms resistor placed inbetween the two points.
02. Connect PIN3(M_BTN#) to PIN6(POWER_SW#) with a jumper wire.
Leave all other pins unconnected. Works like a charm.
Hope it will help others.
This fet is frequently used on clevo laptops and is invariably burnt..
Here is the solution.
01. Connect PIN2(VIN) to PIN8(VIN1) with a jumper wire with 20 Ohms resistor placed inbetween the two points.
02. Connect PIN3(M_BTN#) to PIN6(POWER_SW#) with a jumper wire.
Leave all other pins unconnected. Works like a charm.
Hope it will help others.