Asus Rog G513QR

[cic]

hello i have an asus rog g513qr ryzen 7 series 5000 that initial not powering on the cpu was damaged , after changing the CPU, bios was corupted and i write another, after we have image on display and windows i attached picture ,bios is damaged with bad serial u have picture (the ic grafic is nvidia 3070) do you think the grafic card fault is from bios or i have to solder the ic or replace the GPU IC?

 

[cic]

no solutions?

 

[Admin]

try to update the bios for latest version from the asus website using windows

 

[cic]

try to update the bios for latest version from the asus website using windows

i try was not work i was help in the end buy a friend patching the bios and repair serial number , after that grafic card is ok , i want to pay one year here but if u cant answer faster or u cant patch bios i cant join

 

[godgamerz]

Hey man, sounds like you’ve been through quite a bit already with that G513QR — nice job getting it to boot up again after the CPU and BIOS issues, that’s half the battle.

Now, about the GPU — if the system is giving you a display and even loading into Windows, the RTX 3070 chip is at least somewhat functional, so that’s good news. A corrupted BIOS (especially with missing or wrong serial info) can definitely mess with things like power delivery, thermal control, and sometimes how the GPU is initialized or recognized by the system.

Here’s what I’d check:

• BIOS version: Make sure you’ve flashed the exact right BIOS version for your laptop model — even a small mismatch can lead to weird GPU behavior or instability.
• Missing DMI info: If the serial number, UUID, or model name is blank or wrong in the BIOS, it can actually cause problems with how the system handles GPU and other components. You’ll want to reprogram the BIOS and restore the original DMI data if possible.
• Check the GPU status in Windows: Open Device Manager or use GPU-Z and see if the 3070 is showing up properly. If you see error codes, or it’s not being utilized at all, there might be something off with the vBIOS.
• vBIOS flash (with caution): If it’s a vBIOS issue, tools like NVFlash can help — just be super careful here. Only flash if you’re 100% sure it’s the right version and always make a backup first.

If you’ve gone through all this and it still doesn’t behave right — especially if you see artifacts, flickering, or no acceleration — then yeah, the GPU IC itself might be damaged. Could be a reball or full replacement job.

If you get stuck or want a second opinion, feel free to hit us up. We do board-level repairs and BIOS/GPU work, and we’ve seen a bunch of these ROGs with similar issues. You can check out our shop if you want — happy to help out if you need it!