Admin

Staff member
Laptop Repair Team
Joined
Nov 2, 2017
Messages
8,974
Likes
1,139
Points
4,577
Age
41
Location
Tbilisi
Website
alexlaptoprepair.com
#1
DDR5 Laptop Motherboard Tester
Quickly detects CPU shorts, open lines, and DDR5 slot faults.
LED indicators show fault status—off for open line, extra bright for short.
Test points like BULK,ALERT,HSA,RESET, HSDA, HSCL،POWER GOOD can be measured online.
Pin reference guide on the back for easy troubleshooting.


DDR5 Laptop Motherboard Tester – Detects CPU Short or Open Circuit & Slot Status via Light Indicator
How It Works:
Open Line (No Connection):
The LED remains off, indicating a possible fault in the DDR5 slot or the CPU—this may also suggest the CPU requires reballing.
Short Circuit Line : The LED will glow brighter than the others, signaling a short in the slot or CPU area.

Important Test Points:
For advanced diagnostics, you can remove the tester’s battery (cr2032) and power on the laptop to measure key signals directly from the test points, including:
  • BULK
  • HSDA
  • HSCL
  • HSA
  • RESET
  • ALERT
  • POWER GOOD
These points help in verifying the integrity of DDR5 Power lines and communication between the CPU and memory slot.

Easily Detect CPU Reset Signal:
The tester allows for quick and easy detection of the reset signal coming from the CPU, helping you verify whether the processor is initializing properly.

LED Indicator Pin Reference:
If any LED shows abnormal behavior, you can identify the corresponding pin number by checking the label on the back of the tester. This allows for easier troubleshooting of specific signal lines or faults.

LINK OF THE TOOL
 
Last edited:

Laptop repair Latest videos

Latest threads

Dell Latitude 3310 19717-1 CYPD5126-40LQXIT U7201 type-c controller firmware

Dell Latitude 3310 19717-1
CYPD5126-40LQXIT
U7201
Type-c controller firmware

Lenovo Thinkpad daoli5mb6io

Hi everyone, i need this schematic: Lenovo Thinkpad daoli5mb6io
thanks.

DELL 7010 9010

БИОС DELL 7010 9010

HP Pro 3500

BIOS HP Pro 3500

CYPD OFFLINE ADAPTER FOR TYPE-C CONTROLLER PROGRAMMING SUPPORT SVOD,PSOC MiniProg SWD JTAG

CYPD OFFLINE ADAPTER FOR TYPE-C CONTROLLER PROGRAMMING SUPPORT SVOD,PSOC MiniProg SWD JTAG
SUPPORT ALL TYPE-C CONTROLLER
CYPD5126,CYPD4126,CYPD4125,CYPD4226,
CYPD5137,CYPD4225,CYPD6228,CYPD4136,
CYPD6128,CYPD6127,CYPD6227,CYPD4126,
CYPD5225,CYPD4236








Link for the cypd adapter

Dell vostro 15

15341-1 dell laptop schematics & board viwe

Lenovo G50-30 ACLU9 ACLU0 NM-A311 REV 1.0 BoardView File.TVW

Hello, I need Boardview on Lenovo G50-30 ACLU9/ACLU0 NM-A311 REV 1.0 BoardView File.TVW
Thanks

PMBUS PROGRAMMER [IOR] IR DUAL MODE ONLINE/OFFILINE SUPPORT OFFLINE ADAPTER For Graphics Cards,pc motherboard,laptop GPU Infineon




  • PMBUS IOR/IR/XDP/CHL/ASP PROGRAMMER
    Features:
    Support Online/Offline mode
    ( connect to motherboard directly , or in some cases we need to solder the ic on the offiline adapter )
    All Requirements Support
    3V,1.8V,SCL,SDA
    EN/PE,IREF,IREF2,PGOOD,SALRT
    ESD Protections , Indicators
    Read & Write program
    Monitor functions online and offline
    Change parameters
    Support backup one chip or all systems ( multi chip together )
    PMBUS PROGRAMMER CHIP SUPPORT LIST:
    • SUPPORT
      IR35201,IR35203,IR35204,IR35217,IRPS5401,IR38263
      IR38265,IR38163,IR38164,IR38363,IR38165,IR38365
      IR38060,IR38062,IR.8063,IR38064,IR3590,IR3595
      IR3588,IR3596,IR36021,IR3563B,IR3564B,IR3565B
      IR3567B,IR3570B,IR3585B,IR35211,IR35218,IR3580
      IR3581,IR3584,IR3591,XDPE11280A,IR35207,IR35209
      IR25210,IR35212,IR35215 , MORE
      OFFLINE ADAPTER IR35201,IR3580,XDPE132G5D,IR3595,IR3567,ASP1300,IR3563,IR35217,IR3570,CHL8228,ASP1251,CHL8325,IR3541,IR3564,IR35204
    IOR READ,WRITE & Modify REGISTER Program :



  • According to the schematic, pin 24 is SDA and pin 25 is SCL in the PMBus section.
    Solder SDA, SCL, and GND, then connect the programmer to your computer and power on the device.
    If you’re using an offline adapter, first solder the chip, then connect the adapter to the programmer before connecting the programmer to your computer.
    Software Setup
    Open IR PowIRCenter or XDPDesigner, depending on the chip type.

    When the programmer connects successfully, the status indicator in the lower-left corner will turn green.
    Click the Auto Populate Devices icon (first icon on the left).
    All connected chips will be displayed under Total Pout (e.g., IR35217, IR3580 if both are connected).
    Select the desired chip from the list to display its register map, where you can view and modify parameters.
    Backing Up the Program
    To back up the current program, click Save Config File.
    If a user password prompt appears, simply ignore it and click Continue.
    The file will be saved in .txt format, which you can use later.
    Alternatively, you can save the entire board data by clicking File > Save Board Design, which generates a PCB data file.
    Writing a Program

    To write a configuration, click Load Config File and select the desired .txt file.
    Then click Write All Reg to program the chip.
    Utilities & Diagnostics
    The software also offers several utilities under the Utilities menu.
    For example, selecting SalemDevice will display a counter showing how many times the chip has been programmed (some chips have a write limit).
    Clicking Check MTP will reveal additional memory/programming details.
    Selecting Device Status will display a phase fault report to help diagnose potential hardware damage.





























    LINK OF THE PROGRAMMER : ALEXSOF

A2141 boardview

Anywhere I can get a copy of MacBook A2141 boardview

Dell Latitude 13 3380 16824-1 clear me BIOS OK

Dell Latitude 13 3380
16824-1
clear me BIOS OK
Top