- Joined
- Nov 2, 2017
- Messages
- 9,039
- Likes
- 1,138
- Points
- 4,577
- Age
- 40
- Location
- Tbilisi
- Website
- alexlaptoprepair.com
HOW TO UPGRADE DPOX180H-FNIRSI FIRMWARE TO FIX ALL ISSUES
Digital Phosphor Dual Channel Handheld 180 MHz Oscilloscope
修复问题：
1：能够看到方波上升下降的垂直线
2：修改了垂直电压光标测量的名称
3：修复开机语言
--------------------------------------------------------------------------------
Fix issues:
1: When measuring a square wave, you can see the rising and falling vertical lines.
2: Modify the name of the vertical voltage cursor measurement
3: Modified the text of the switching language interface.
--------------------------------------------------------------------------------
修复3点：
4：信号发生器频率问题
5：个别固件升级变砖问题
6：暂停后只显示单帧波形，便于分析协议
----------------------------------------------------------------------------------
Fix the problem:
4: Signal generator frequency problem
5: Some devices cannot be turned on after firmware upgrade
6: After pausing, only a single frame waveform is displayed, which is convenient for analyzing the protocol
-----------------------------------------------------------------------------------
2023/09/27 V40 LATEST VERSION
------------------------------------------------------------------------------------
修复内容：
7：波形更细，更清晰，降低了波形粗细
8：方波垂直线更亮，更明显
-------------------------------------------------------------------------------------
Fixes:
7: The thickness of the waveform is reduced, making the waveform thinner and clearer.
8: The vertical lines of the square wave are brighter and more obvious
--------------------------------------------------------------------------------------
Upgrade steps:
WATCH THIS VIDEO
Digital Phosphor Dual Channel Handheld 180 MHz Oscilloscope
修复问题：
1：能够看到方波上升下降的垂直线
2：修改了垂直电压光标测量的名称
3：修复开机语言
--------------------------------------------------------------------------------
Fix issues:
1: When measuring a square wave, you can see the rising and falling vertical lines.
2: Modify the name of the vertical voltage cursor measurement
3: Modified the text of the switching language interface.
--------------------------------------------------------------------------------
修复3点：
4：信号发生器频率问题
5：个别固件升级变砖问题
6：暂停后只显示单帧波形，便于分析协议
----------------------------------------------------------------------------------
Fix the problem:
4: Signal generator frequency problem
5: Some devices cannot be turned on after firmware upgrade
6: After pausing, only a single frame waveform is displayed, which is convenient for analyzing the protocol
-----------------------------------------------------------------------------------
2023/09/27 V40 LATEST VERSION
------------------------------------------------------------------------------------
修复内容：
7：波形更细，更清晰，降低了波形粗细
8：方波垂直线更亮，更明显
-------------------------------------------------------------------------------------
Fixes:
7: The thickness of the waveform is reduced, making the waveform thinner and clearer.
8: The vertical lines of the square wave are brighter and more obvious
--------------------------------------------------------------------------------------
Upgrade steps:
WATCH THIS VIDEO
Last edited:
